The IoT Xtreme Datalogger is a product designed by engineers for engineers, but with the simplicity of operation that delivers results quickly.
Glows ORANGE on boot. Flashes GREEN every 60 s to confirm batteries have sufficient capacity to power the datalogger. Turns RED to signal that the batteries need changing.
Six (6) Fischer DBP 102 series 7-pole receptacles rated to IP50 for indoor and unexposed industrial environments.
Accepts up to six (6) Fischer S 102 series 7-pin standard A polarity connectors.
Contacts guaranteed up to 10,000 mating cycles.
Receptacles are wired to accept signals from up to six (6) Micron Dual-Bond Stress and Temperature (DBST) sensors.
Wired connectivity for downloading data and/or long-term power to datalogger. When two batteries (7.2 V) are installed and USB cable (5 V) is connected, power will be drawn from the source that has the higher voltage.
the IoT Xtreme datalogger and its software are designed to simplify data acquisition for the Dual Bond Stress and Temperature (DBST) sensor.
Each of the six channels can be individually selected and verified through the datalogger application called WinClient. The data acquisition rate is user-selectable.
For long-term acquisition, the datalogger can acquire data for up to one year on battery power alone or indefinitely when connected to a computer via the USB cable.
The Dual Bond Stress and Temperature (DBST) Sensor is a miniature dual measurement sensor that uses four semiconductor strain gages to measure stress and a one semiconductor sensor to measure temperature. The small size of the sensor minimizes stress field perturbations in the surrounding material. The high spring constant of the diaphragm allows stress change measurements in viscoelastic materials. The DBST sensor can be purchased with a full-scale range of 100 psi (690 kPa) or 200 psi (1380 kPa). Higher full-scale ranges are available upon request.
IoT Xtreme Technical Data | |
Parameter | Value |
DBST sensor range | +/- 28 mV |
Bore diameter sensor range | -5 mV to +500 mV |
Channel accuracy | 1% of full-scale range |
Min/max acquisition period/sample | 10 ms/sample to 3 weeks/sample |
Memory capacity | 130,000 data records per channel |
Battery quantity x type | 2 x SAFT Li-SOCl2 3.6V 13 Wh Model LS14500 |
Microprocessor | STM32L433VCT6 32-bit with 256kB flash memory |
Fischer receptacle | DBP 102 A056-139, 7-pole female, Part 100687 |
Fischer connector | S 102 A056-132+, 7-pin male, Part 100499 |
Operating temperature range | +40F to +100F (+4C to +38C) |
Storage temperature range | -10F to +120F (-12C to +49C) |